The concrete U-groove is mainly made by using the concrete U-groove mold, which is easy to operate and has low requirements on the technology, and can also be carried out by amateur construction units. Before application, we should pay attention to whether the mold is intact and leveled, so as to prevent the uneven surface of the products made by the mold due to the problem of mold, and the lack of reliability, which will endanger the sewage discharge function, also endanger the durability, and suffer great harm during the service life. If the concrete U-groove must be removed in the application link, it will cause great inconvenience to the construction unit. The inspection should be carried out to clean the sludge on the mold, which will harm the quality of the product. After cleaning, assemble the die on the workbench. When assembling, the die must be connected with screws. Why not use screws instead of lock catch? Because the mold is to be reused for many times, the service life of the lock is less than that of the screw, which is not conducive to the long-term application of the concrete U-groove mold. When filling the concrete U-shaped groove mold, the vibrator must be added to the raw materials to exhaust the air in the raw materials as much as possible, reduce the bubbles in the products, so as to improve the reliability of the products and enhance the bearing capacity of the concrete U-shaped groove. In the long-term application, it will not deform or damage. After the application, it is necessary to clean the concrete U-groove mold to lay a good foundation for the re application.
U型槽模具屬于U槽模U形槽水泥模種，專業設計規格選擇的U型槽的模具，其良好的，U形槽的模具生產在嚴格按照生產圖紙，將產物成形為用于處理廢水設施，有是矩形梯形，鋼鐵廠生產的水泥U型槽模具的使用焊接在一起，可以長期使用，并且尺寸標準，質量可靠。水泥U型槽模具設計技術進行參數以及常用U型槽模具企業主要工作尺寸為長度50厘米，上寬30-50cm ,深度30-50厘米，壁厚5-8厘米 ,兩側可以分為帶沿兒或者一個不帶沿兒兩種。
U-shaped groove mold belongs to U-shaped groove mold, U-shaped groove cement mold, professional design specification selection of U-shaped groove mold, its good, U-shaped groove mold production in strict accordance with the production drawings, the product is formed for wastewater treatment facilities, there are rectangular trapezoid, steel plant production of cement U-shaped groove mold use welding together, can be used for a long time, and the size standard, reliable quality. Cement U-groove mold design technology parameters and commonly used U-groove mold enterprise main working size is 50 cm in length, 30-50 cm in width, 30-50 cm in depth, 5-8 cm in wall thickness, both sides can be divided into two kinds with edge or without edge.
一般U型槽模具都是可以采用預制方式進行生產,整體現澆的話我們無法通過塑造U型的效果。U形槽在預成型件的使用，通常由平坦的方式，從而使插座可以節省生產時間。U型槽模具是一種可以囊括 了多種不同型號以及企業使用技術領域的模板,該模具過去我們都是使用在水利灌溉系統工程上,現在在公路排水,高速排水、高鐵等工程上都在通過使用,其具體影響大小和樣式都會有專們的設計施工圖紙。 采用U型槽模具采用人工預制的形式，一般U型槽的體積不是很大，人工可以搬運，拆卸，往往以50cm為主，但灌溉中使用的大U型槽，如長度3米，4米，需要使用行車，叉車等工具，這種大U型槽在東北，山東地區使用較多。
Generally, the U-shaped groove mold can be produced by prefabrication, but we can't achieve the effect of U-shaped groove mold by casting in situ as a whole. The U-shaped groove is usually used in the preform in a flat way, so that the socket can save production time. U-groove mold is a kind of template that can cover a variety of different models and the technical fields used by enterprises. In the past, we used the mold in water conservancy irrigation system engineering, but now it is used in highway drainage, high-speed drainage, high-speed rail and other projects. The specific impact size and style will have professional design and construction drawings. Generally, the volume of U-shaped groove is not very large, and it can be moved and disassembled manually. It is usually 50cm. However, the large U-shaped groove used in irrigation, such as 3M and 4m in length, needs to use tools such as traveling crane and forklift. This kind of large U-shaped groove is widely used in Northeast China and Shandong Province.